Archive for the ‘DIY’ Category

Simple Fix for Bamboo Shades

Tuesday, June 22nd, 2010

These shades look great don’t they?  I love them.  I use them in my kitchen and my bedroom to block out the heat from the sun.  But guess what.  They are completely see through.  Guess what else.  My kitchen AND BEDROOM face a main neighborhood road, and we don’t have a privacy fence.  What’s that you say?  That you knew these blinds were see through?  That I should have known that since I can see right through them to my yard during the day that I should expect the opposite to happen at night?  Well good for you for being so smart.  And I bet you only use them in non-private areas (like not your bedroom) too.

Well, smarty pants, I decided to devise a way to keep using my blinds, since I like them so much, without giving everyone who drives by a show.  For about 5 dollars I was able to buy enough muslin to cover the backs of all five of my shades making them completely private, but not much heavier.

In case you are also as dense as me and are now panicking over your shades, I’ll tell you what I did:

1. I removed the knot where the strings attach to the shade but was careful to study how the knot was tied so I could do it back later.  I unthreaded the strings but didn’t pull them all the way out of the pulleys and everything.

2. Working in about 4 inch strips I used A LOT of hot glue directly on the shade and then pressed the muslin to the shade with a tool…not my hand…cuz it’s hot.

3. I made sure to measure and cut holes for the loops to go through BEFORE I hot glued over them.

4. Then I rethreaded the strings and, rehung my shades, and ran around in my underwear for the rest of the night….which I guess isn’t different than any other night of the week, only this time all those people weren’t hanging around the backyard.

Repurposing Canvases

Friday, June 11th, 2010

Among other things, I’m trying to redecorate my son and daughter’s room before I get too big to do anything. Part of the room design involves an animal art gallery, for which I am really geeking out over. My first plan was to buy prints on Etsy, but then when I realized how expensive that would be to buy and then frame all of them, I changed my mind to doing just canvases, and painting my own pictures. Then I remembered that I sort of have twin babies growing in my belly and making me hungry every hour and that painting 10 or more paintings would probably not be doable at this time. AND I get really tired of looking at my own art on the walls. So I decided to “commission” my friend’s daughters to do some paintings for me.

I have stretched my own canvases for fine art purposes which is easy and cheaper than buying one. But for kids to paint on I decided that a much cheaper and easier method would be to collect canvases from DI and white wash them.

I found mine for 2-5 dollars and gave them one coat of latex paint from my stash in the garage.

Here’s a TIP: Any texture from the existing painting will not go away unless you sand it, but for kids to paint on, or another type of craft project it should be fine.  A coat of latex paint will suffice. But if I were repurposing a canvas for a more fine art project (which I probably wouldn’t do, I would just stretch my own or buy new) I would sand the canvas and give it a few coats of Gesso.

For about 13 dollars I bought craft paint in white and black, the primary colors, as well as  brown and purple because they are a pain to mix. We spread ample drop clothes on the table, dressed the kids in old shirts, and let them at it!

The older girls had already planned out what they were going to do, because I had “commissioned” them to do so. But the little girls just painted, rather quickly, with A LOT of paint.

My son preferred just eating his.

I love the results! Kids have imaginations that are so unadulterated and I love seeing what comes out of them.  They are going to go very nicely in the animal art gallery, except for the boy,

who will serve as the only living part of our exhibit. He looks quite like an Avatar, don’t you think?

Sheet Quilt

Friday, May 28th, 2010

My son and daughter will be sharing a room for who knows how long.  Right now the walls are purple and green striped.  Not exactly unisex.  So I have a big plan that I will only tell you about in pieces because that’s about how it’s going to get done!  The first piece being bedding.

I really geek out over vintage sheets.  Or just old, soft, sheets that may or may not be vintage.  And I also geek out over mixing patterns.  I made my first “quilt” from sheets about three years ago and I absolutely love it.  It’s soft and breathable and seems to be just warm enough in the summer and a good addition to our comforter in the winter.

In no way do I claim to be a quilter, and in not very many ways does this “quilt” resemble it’s name.  But I would like to show you this quick, easy, and inexpensive way to make a quilt from sheets!

Here’s what you will need for a standard (60 x 84) twin quilt:

2 flat sheets (stain and rip free)

batting

thread of various colors

3 packages of quilt binding

1. Giving yourself about 4 extra inches in the length and width, cut your sheets and batting to fit.  It may be necessary to pick out the stitch where the sheets cuff is to gain the extra fabric.  If possible, cut the selvage off the vertical sides of the sheets.  They are usually slightly shrunken and will cause a length discrepancy and puckering.

2. About batting, I have only used natural material batting, like cotton or bamboo, because it is much more breathable and washes better.  Batting made from synthetic materials may be cheaper, but it will FEEL cheaper.

3. Spread one sheet on the floor, right side down, and smooth completely.  A yardstick is a helpful smoothing tool.

4. Laying the batting down on the sheet without wrinkling the sheet underneath is tricky, especially if you are doing it alone

because your husband is busy working a second job to help pay for, um, twins.  The best way I see to do this alone is to roll the batting, place it in the right position at the top or bottom of your quilt, and unroll slowly.

5. Use the same rolling method to place the second sheet, rightside up, on top.

6. PIN ALL SIDES generously and pin the middle at about every 10 inches.

7. Determine how many colors of thread you want to use, and how close you want the stripes to be.  I used four colors and stitched them vertically about every 3 inches.  (You could sew vertically, horizontally, both, in circles…use your imagination!)  It’s very important to mark where the first color of stripes will go.  I tried to eyeball the first quilt and the lines where like a drunk-lady-sewing kind of wonky.  Use either a fabric pencil or a specific pin (I used safety pins) to distinguish where your lines are being marked versus all the other pins all over the place.  I marked a line every 12 inches.

8. You will only need to mark one of the colors to get your bearings.  Once you have sewn all of the first lines, it will be really easy to use them as a guide for the rest of your colors.

9. Inevitably, there will be puckering when you sew.  No matter how much I pin, it seems I can’t prevent the sheets from sliding here and there and creating puckers, but here are a few tricks that can reduce the amount of puckering.

A.  Alternate sewing top to bottom, then bottom to top, instead of sewing every line the same direction.  The fabric should then get pulled up and down evenly.

B.  Fold or roll the extra width and hold on to them like the handles of a scroll as you sew.  This will make the area you are sewing more taut and less prone to sliding around.

C.  Get over it.  I kind of like the puckering.  It makes the blanket feel more “quilted”.

10. After you have sewn all of your lines in all the colors of your choice, cut the extra sheets and batting to the exact measurement that you desire.

11. Sew the ends of your binding together, right sides together, to make one long piece of binding.

12. Pin the binding to the quilt.  This is the worst part of all.  I hate it.  It takes me like 30 minutes and makes my fingers hurt and no matter how carefully I pin, and sew, I will still miss parts on the other side.  That said…pin carefully and generously.  Make sure, with every pin, that you catch the binding on the other side as well.  When you get all the way around the blanket, cut the extra binding and fold the raw ends under to hide.

13. Slowly, and as straight as possible, sew the binding.  But like I said, you will still probably miss a little on the other side.

14. Inspect the underside for missed stitches and go back and stitch them up.

Now you have a soft and very washable quilt that hopefully wasn’t too hard to make!

Here’s my price breakdown for one quilt:

Two Sheets:  $4

Batting:  $16

Binding:  $7

Thread:  $3

Total: $30

Basic Supplies for Refashioning Jewelry

Tuesday, May 4th, 2010

I’m not a jewelry maker, but I believe in having a few basic jewelry making supplies around the house in case you need to fix something.  Here’s the basics that I have:

1. 3 in 1 pliers, I bought mine at Walmart for only about 3 dollars. They make loop bends in the end of wire, cut stuff, and smash stuff like crimp beads and jump rings.

2. A variety pack of pieces parts which can usually be found in a cheap kit.  You should have these:

3. Glue and flexible wire.  (Alas, I don’t have any wire to take a picture of right now).

I have used these supplies many times to make a quick pair of earring when I’m bored, or fix my favorite jewelry that breaks.

I bought this necklace at a yard sale for .50 cents and then promptly caught it in my daughters hair and popped it all over the place.  All it took was some new wire and a crimp bead to make it back.  The wire is stronger than the old string it was made with, which is often the case with old jewelry.  I make it a habit to re-wire old necklaces BEFORE I wear them now. OH! Not pictured, but included in what I have, are basic clasps.  This necklace was long enough to slip on over my head, but they aren’t all that long…so have some clasps too.

I even used some leftover beads to make earrings.  Well, my sister in law did it for me.  Thanks Mardy.  All she needed was a head pin, a jump ring, and a fish hook.  They are so versatile and have quickly become my most worn.  Mr. Denizen says they look like gum.  He’s right.

I bought these earrings at a thrift store for 1.50.  The old parts were tarnished, broken, and a bit gaudy for my tastes.

I used a large jump ring and fish hook earring to make them look more simple and clean.

Last, I’ve always wanted to see if I could make earring from my Bag O’ Buttons.  To make them I threaded some crochet yarn through the holes and tied a tiny knot in the back.

Then I glued basic stud posts to them with the jewelry glue…which as far as I can tell is the same thing as super glue.  Word to the wise, make sure the glue is completely dry before you try them on.  I mean, not that I know from experience or anything.

Do you like them?  Do they look like they’ve been sewn onto my earlobes all creepy and “Coraline” like?

Happy Fixing!

3 Dresses in 3 Weeks: The Jumper

Friday, April 30th, 2010

Ah yes, the jumper.  I am pretty sure they were plentiful enough in the 90’s to serve as a type of currency.  You should have no problem finding a jumper, or three.  Extra points to anyone who dares to refashion a denim jumper with an applique of an apple or kitten on it.

It’s hard to say what influenced me to try this jumper on…it may have been the tiny polka dot print which I am always a fan of.  It was an inspired choice nonetheless, because this jumper fit like a glove…it just needed a few changes.

I don’t wear sleeveless things and the length was not harmonious with my cankles. This refashion isn’t complicated enough to warrant a whole tutorial, so I’ll just tell you what I did:

1. Cut the extra length off the bottom.

2. Used the extra fabric to make sleeves.

3. Removed the facing from the sleeve holes and attached the new sleeves.

Tada!  I don’t think anything goes better with navy blue polka dots than red.  Or possibly yellow.  It’s a pretty simple dress but a quick and easy solution to the jumper plague that infects many thrift stores and some of our closets…you know who you are.

3 Dresses in 3 Weeks: MuuMuu Turned Dress

Wednesday, April 21st, 2010

Muu Muu, nightgown, housedress, Pj’s, it matters not what you call them.  What does matter is that for some reason I have always been attracted to them and want to wear them as dresses.  Between the delicate lacy details and the breezy lightweight material, I feel like nightgowns make perfect sun dresses…and I aimed to prove that you could refashion them into socially acceptable (meaning, doesn’t look like you are wearing PJ’s) dresses.  Well, the first attempt was a big failure, although I still asked several people their opinions before I was convinced to give it up.  And being the stubborn and slightly crazy creator that I am, I only gave up on that particular dress…I had two more to try again on!  You can’t keep me down.

Embarrassingly, I will show you the first attempt.  Don’t make fun of my faces.

What not to do:

Strike 1. The fabric was way too thin and flimsy

Strike 2. The print was washed out and drab.

Strike 3. The sleeves were too big, even after reshaping them, and the dress was still too full.

I even had a Strike 4. I love a frilly neckline with buttons and lace, but paired with the other strikes, it was just too much.

All these things together gave it the “I just escaped from the Happy Valley Assisted Living Home” look.  When choosing your nightgown pretty much do the opposite of all those things.

But like I said, I had a stash of them waiting in the closet…good thing they are only three dollars each!

What to do:

1. Remove the sleeves, unless you are satisfied with the way they fit already.

2. Wearing it wrong side out, pin the armhole shut to make it smaller.  This will also give you a place to start to take out the extra width in the sides. Follow the natural curve of your rib cage, tapering in slightly at about your bra and ease the line all the way down to the hem.  You can get a rough pin while you are wearing it and once you take it off,  a yardstick really helps to keep your line straight.  Add more pins or use a fabric pencil to mark where you will sew.

3. Do the same to both sides.  Try it on and inspect your work before cutting off any extra material.

4. You are going to need to take out the extra fabric in the front by adding darts.  If you don’t know what a dart is…ask your grandma.  Pin from the tip of your bust (nipple, there, I said it), taper in the most at the empire waist, and then ease back out to about your belly button.

5. Do the same in the back.  Start above your shoulder blades, taper in at the small of your back, and ease out at the largest part of your hips (the tip of your butt).  This will add shape to the back.

ONE THING to remember when putting in your darts;  you still have to be able to pull this dress on over your head…so as tempting as it is, don’t make them too fitted.

6. Reshape the sleeve should you so desire.  I use a pattern piece from a different dress pattern to give the sleeve a better (less Muu Muu-ish shape).  Sew the sleeve back in.

7. Hem the bottom to a more flattering length.

I used the extra material from the hem to make a little bow embellishment for the neckline.  I’m sure there are all sorts of things you could do!

I think the second try is a WIN.  It’s lightweight and perfect for my trip to Phoenix!  I also really enjoy the somewhat Retro feel it has to it.  So, you tell me, does it still look like a nightgown?

3 Dresses in 3 Weeks: Dress One, Suspenders

Friday, April 16th, 2010

I love wearing dresses in the summer time. I wear them more than pants or shorts.  To celebrate the warm weather I’ll be refashioning three dresses over the next three weeks.

I also love suspenders.  This is not my original idea, although I wish I could claim it. I found it last fall over at Thrift Candy and decided I wanted to make my own version.  It’s was pretty dang easy.

What to have:

A dress with thin/no straps

A pair of suspenders, I prefer the button hole kind

Buttons (Have you bought your Bag O’ Buttons like I told you to?)

What to do:

1. Cut off or pick out the old straps.

2. Working on the front first, sew the buttons in place.

3. After the front is attached, decide where you want that back straps to attach on the dress, and how long you need the straps to be.  You may want to use the old straps to measure, but I wanted mine to fit a little different so I didn’t use them.

4. You will probably have to resize and reconstruct your suspenders.  If your pair looks like this:

you will have to resize them at the junction.  If including the junction makes them too long, you won’t be able to use your button hole and will have to sew the straps straight to the dress.   If your pair looks like this:

you will cut the junction off completely, pick off the button hole tips and sew them back on at the desired length.

5. Sew the buttons on to the back and attach your newly sized suspenders.  Hooray!

I am very excited to wear mine.

Almost as excited as Clover who was thrilled to be getting my attention.

Seriously, is she smiling?  She loves, no adores, no WORSHIPS me in an almost creepy sort of way.  But I guess I like it.  And speaking of creepy adoration, this is what happens when I ask Mr. Denizen to help me take pictures for a post:

There are SEVERAL more in this set, as well as some in our home videos.  Christmas. Kid’s birthday parties.  He is quite proud of them.  And himself.

DIY iPad Car Holster, Free Pattern Download

Tuesday, April 6th, 2010

CLICK HERE TO DOWNLOAD PRINTABLE INSTRUCTIONS AND PATTERN

or, visit my Etsy shop to buy one!

Mr. Denizen ordered his iPad online and got it right on time.  He’s very diligent when it comes to his electronics.  Of course you know I had to find some way to participate in all this goodness.  I’ve wanted a DVD player for car trips for a while so created a simple way to mount this expensive electronic in front of our children and hypnotize them all the way to Phoenix.

You will need:

1 square foot of flannel, felt, or fleece.

1 square foot of duckcloth or something thick and unstretchable

8 1/2 inches of 1/2 inch wide black elastic

48 inches of nylon strap

1 clip

Appx. 7 3/8 x 9 1/2 inches of plastic  (cheap flexible cutting boards work well)

Note: It’s very important that measurements and cutting are done with precision in order for your iPad to fit snuggly and safely.

1. Cut pattern along bold black line and tape pages 1 and 2 together, and 3 and 4 together, matching the open ends exactly.

2. When cutting fabric make sure to give a seam allowance. I did ½ inch.

3. Mark the location of the straps, the holes for the elastic, and the hole to insert your plastic or cardboard either with pins or a fabric pencil.

4. Cut straps to 24 inches each and singe the raw ends with a lighter to stop fraying.

5. Sew straps to back, stitching close to the edges, and making sure to stop at your marks.

6. Pin extra strap length in the middle of back piece.  Sew front to back with right sides together making sure to skip sewing at elastic marks, or go back after and pick out those stitches.

7. Cut the corners off at a diagonal to your stitching.

8. Turn right side out and use a blunt tipped object to push corners out.

9. Turn raw ends in and iron seams flat.

10. Insert 1/4 inch of elastic into elastic holes and sew shut using a zig-zag stitch two or more times.

11. Have your iPad try it on and make adjustments if needed.

12. Insert plastic or cardboard. If you are using plastic, I recommend rounding the corners of the plastic so it doesn’t catch or tear your fabric when you are sliding it in.  You may also have to trim your plastic here and there for it to fit.

13. Fold raw ends inside and slowly sew hole shut.  Try not to sew through the plastic or cardboard.  This part is the hardest.

14. Install plastic clip according to package instruction.

More Notes: When sliding your iPad into your holster the rotation toggle switch may get switched.

This holster isn’t fool proof. It isn’t meant to withstand a lot of jostling. Use common sense when deciding when and where to hang it.

I am not responsible for injury to you or your iPad!

CLICK HERE TO DOWNLOAD PRINTABLE INSTRUCTIONS AND PATTERN

or, visit my Etsy shop to buy one!

Log in

Search this blog:

Go Ahead!
Grab It!
The D.I. Denizen

Visit Us On:

Facebook Twitter